MM-100-H
Malfunction Monitor™
Jackson Systems
The Malfunction Monitor™ is designed to continuously monitor the control voltage and current draw of a single piece of equipment. In the event of a malfunction, the MM-100 will send a signal to an alarm, phone dialer, or computer to alert that a malfunction has occurred. This will reduce the chance of damage to the facility and equipment not to mention the down time and inconvenience.
If the 24 Volt control voltage is present but there is no current after six seconds or six minutes, the current sensor module will close a set of dry contacts that signals there has been a malfunction.
Critical Applications:
Specifications:
Current Rating: .25 - 150 Amps
Maximum Monitored Control Voltage: 30 Vac
Alarm Contacts: SPDT (Rated at 5 Amps)
Enclosure: NEMA1
Dimensions: 4" High X 2" Wide