Wireless Zone One™ Dampers

• Enlarge Photo

Wireless Zone One™ damper assemblies are designed to prevent overheating and overcooling of individual zones within a commercial building or residence.  This can now all be accomplished without the hassle or cost of running wire to a thermostat. Wireless Zone One™ allows you ultimate flexibility in the placement of the thermostat for better performance.

The WZ1-T™ is a battery powered, auto-changeover thermostat that communicates via an RF wireless data link to a damper control module located on the Wireless Zone One™ damper.

Wireless Zone One™ damper assemblies include the WZ1-T™ Wireless Zone One™ thermostat, control module, and the damper. 

Sequence of Operation:
An automatic changeover duct sensor located on the damper senses whether there is warm air or cool air in the branch supply duct.  If the WZ1-T™ Wireless Zone One™ thermostat is calling for cooling and the duct sensor determines there is cool air in the duct, the damper will power open; otherwise, the damper will remain closed.  If the WZ1-T™ Wireless Zone One™ thermostat is calling for heating and the duct sensor determines there is warm air in the duct, the damper will power open; otherwise, the damper will remain closed.  The relay control module has LED indication to confirm mode of operation and damper position. 


Specifications:
Damper Actuator Type:  24 Volt, 10 VA,  2-wire powered open / spring return close
Communications Indicator: Multi-color LED indicates mode of operation
Damper Position Indicator:  Green LED indicates when damper is open
Communications:  Wireless, 915 MHz, proprietary protocol
Range:  Up to 100 feet
Control Module Power:  24 VAC, 40 VA
Control Module Housing:  Molded Plastic
Control Module Dimensions:  3.25 X 5.50 X 1.125 inches (WHD)
Thermostat Dimensions:  5.00 X 4.50 X 1.00 inches (WHD)