Description
Great Thermostat – Great Features – Great Price
The Comfort System™ T-32-P™ universal thermostat is a perfect mix of aesthetics, intuitive operation and performance at an amazingly affordable price. The T-32-P™ is compatible with most residential and commercial HVAC systems and is ideally suited for use with Comfort System™ zoning systems.
The Comfort System™ T-32-P™ is available exclusively from Jackson Systems.
Features:
- Manual or auto changeover
- Programmable or non-programmable
-
Equipment compatibility o 1 Heat / 1 Cool
o 2 Heat / 2 Cool
o 2 Heat / 1 Cool Heat Pump
o 3 Heat / 2 Cool Heat Pump
o 2 Heat / 1 Cool Dual Fuel
o 3 Heat / 2 Cool Dual Fuel - Adjustable setpoint limits
- Keyboard locks
- Remote occupancy override
- Adaptive recovery (optimized start)
- Smart fan logic for commercial control
- PIN Protected installer setup menus
- Outdoor air temperature display
- 24 volts with non-volatile memory
- Integrated Modbus Communications
- 5 year warranty
- Can be Heat Only
- Can be Cool Only
- 3 Speed Fan (Manual or Auto)
- Indoor Remote Sensor
- Temperature Averaging 1-2-3 or 4 Sensors
- After Hours Override 0-12 Hr
- Single Set Point Stat (2 Programs)
- Freeze Protection Below 40 degrees Fahrenheit
- Filter Monitor
- Short Cycle Protection (4 min. selectable on/off)
- Sensor Calibration +/- 5 degrees Fahrenheit
- Adjustable Cycle Rate / Response Time (The lower the number the shorter the cycle)
- Adjustable Hi Balance Point Point (Gas heat locked out)
- Adjustable Low Balance Point Point
- Adjustable Stage Diff. 1.4/1.9/2.4 degrees Fahrenheit
- Adjustable Purge Time
Specifications:
- Input Voltage: 24VAC 50/60 Hz +/- 15%
- Relay Rating: 24VAC @ 1 Amp maximum per relay
- Operating Temperature: 32 to 122 degrees F
- Operating RH: 0-95% (non-condensing)
- Storage Temperature: 32 to 105 degrees F
- Display Size: 2.75" W X 1.875" H
- Accuracy: +/- 0.3 degrees @ 77 degrees F
- Temperature Sensor(s): 10K NTC type 3
- Stage Delays: Minimum change over time method
- Timed Upstage: 5 – 90 minutes
- Short Cycle Protection: Off to 4 minutes
- Cycle Rate: Unlimited, 30, 10, or 6 (installer set)
- Display Resolution: 0.1 degree F
- Control Range: 41 to 122 degrees F or Heat Off / Cool Off
- Outdoor Temperature Display Range: 17 – 140 degrees F
- Back Light: Blue EL (Electro Luminescent)
- Back Light Life: 3,000 hours to half brightness
- Optimized Start/Stop: Time vs. Temperature Differential – updating(br> Communications Protocol: Modbus
- Fan Speeds: Difference between setpoint and room temperature
- Approvals: FCC Part 15 (pending) C-tick
- Warranty: 5 years
Features and Benefits
- Up to 3H/2C conventional and heat pump systems
- 7 day programmable
- Large backlit display
- Auto or manual changeover
- Keypad and/or setpoint lockout
- Smart fan logic for commercial control
- Adaptive recovery
- Optional indoor sensor (T-S1 or T-S2) or outdoor sensor (T-OTS)
- Outdoor temperature display with use of optional outdoor sensor (T-OTS)
- Available with integrated Modbus communications (Version 2.20)
- Hardwired
- 5-year warranty
