Cool Air Products AC SmartSeal Quick Shot Leak Stop 322BP Easy Inject Kit

Description

AC/ SMARTSEAL Quick Shot is Cool Air Products newest technology that does not require pumping down of the system. The re-usable injection hose will last for multiple doses and is operator friendly. This product is ideal for direct pinhole repairs and the prevention of refrigerant leaks. The concentrate solution is a 100 percent green, eco-friendly AC leak sealant that is non-flammable, non-toxic, and safe for the user.

Features:

• Ideal for preventing refrigerant leaks or direct repairs
• Permanently seal leaks of refrigerant gas in AC and refrigeration systems
• Compatible with all refrigerants
• Polymer free
• Approved by OEMs
• Not activated by oxygen or moisture
• Non-clogging of all components

How to use:

1. Turn the A/C system on. If the unit is a heat pump, be sure it is set on cooling mode. Connect the cartridge to Easy Inject and fully inject sealant in it.
2. Connect Easy Inject to the low-pressure service port of A/C system. Connect a charging hose to a refrigerant cylinder.
3. Briefly open the cylinder valve to purge air out of the charging hose. Quickly tighten the charging hose fitting to Easy Inject. Inject refrigerant through Easy Inject and push sealant into the A/C system.
4. Run A/C system for 30 minutes to allow the product to fully circulate.