Goodman GPHH3 13.4 SEER2 Packaged Heat Pump | Horizontal | R-32 Refrigerant | Multiple Sizes

Description

The Goodman GPHH3 is an all-in-one packaged heat pump rated at 13.4 SEER2 and 6.7 HSPF2, available in 2 to 5-ton sizes, built specifically for horizontal ductwork installations with quiet horizontal discharge. It combines the cooling and heating sections into a single, fully charged cabinet — with no separate indoor and outdoor units — for straightforward ground-level or rooftop installation, sharing one common footprint across all tonnages. A field-installed electric heat kit is available for supplemental heating, since heat pump output typically tapers off at colder outdoor temperatures.

At the core is an energy-efficient scroll compressor for dependable, consistent refrigerant flow across the line, paired with a multi-speed ECM indoor blower motor for efficient, quiet air circulation. A copper tube/aluminum fin condenser coil and all-aluminum evaporator coil provide reliable heat transfer, and a totally enclosed, permanently lubricated condenser fan motor adds to long-term durability.

The heavy-gauge galvanized-steel cabinet has an Architectural Gray powder-paint finish, louvered condenser coil protection, and aluminum foil-facing internal insulation reinforced with fiberglass scrim. The fully insulated blower compartment includes convenient access panels, and the cabinet meets air leakage requirements when tested to ASHRAE Standard 193.

Designed, engineered, and assembled in the USA. AHRI Certified, ETL Listed. Backed by a 10-year parts limited warranty, requiring online registration within 60 days of installation (registration requirements vary by state).

Select the correct tonnage below based on your Manual J load calculation and ductwork configuration.

Features:

• 13.4 SEER2 / 6.7 HSPF2 packaged heat pump — available in 2 to 5-ton sizes

• Horizontal-discharge-only design — one common footprint across all tonnages

• Energy-efficient scroll compressor, single-stage across the line

• Multi-speed ECM indoor blower motor

• Copper tube/aluminum fin condenser coil; all-aluminum evaporator coil

• Totally enclosed, permanently lubricated condenser fan motor

• Fully charged system; R-32 refrigerant

• Electric heat kit available as a field-installed option

• Heavy-gauge galvanized-steel cabinet with Architectural Gray powder-paint finish

• Louvered condenser coil protection; foil-faced insulation with fiberglass scrim

• Meets ASHRAE Standard 193 cabinet air leakage requirements

• AHRI Certified | ETL Listed | Made in USA

• 10-year parts limited warranty (registration required)