Description
Ensure reliable flame detection and system safety with the Honeywell R7847A1082 Flame Amplifier. Designed for use with Honeywell’s 7800 and R7140 Series relay modules, this solid-state amplifier responds to flame detector inputs to indicate the presence of flame, providing essential feedback for burner management systems.
Features:
- Flame failure response time of 0.8 or 3.0 seconds.
- Flame signal strength ranges from 0.0 to 5.0 Vdc.
- Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
- Flame signal test jacks to measure amplifier flame signal voltage.
- Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
- Compatible with existing Honeywell flame detectors (order separately).
- Type: Rectification
- Flame Failure Response Time (sec): 2.0 sec or 3.0 sec
- Self Checking: None (standard)
- Use With Primary Safety Control: 7800 SERIES Relay Modules
- Use With Flame Sensor: Gas: Rectifying Flame Rods C7004,5,7,8, or 9, Q179 for impedance matching for leadwire runs > 50′ or Ultraviolet Flame Sensor C7012A, C
